ADHERAL
 REFERENCES AND
 MAIN CHARACTERISTICS

 

ADHERAL NS (no safety elements) EN347-1 O4 HRO.
ADHERAL E (steel toe-cap) EN345 S4 HRO.
ADHERAL SA (steel toe-cap and midsole) EN345 S5 HRO.

High Performance ATS sole (adhesion on all surfaces).
 Excellent non-slip properties - adhesion factor greater than 0.15 (in compliance with NFS 73012 ).
 Resistant to contact with chemicals: oils, greases, animal fats, cleaning   and disinfectants products.
 High mechanical resistance.
 Light and supple.
 
 SPECIFIC CHARACTERISTICS
COLOUR: White.
WEIGHT (size 42): 1.800 kg per pair (ADHERAL E).
TYPE OF ELASTOMER: NBR.
MECHANICAL CHARACTERISTICS: Good resistance to abrasion (150 mm³, in compliance with EN 344 standard) cuts and perforation.
CHEMICAL CHARACTERISTICS:

Excellent upper and sole resistance to animal and vegetable fats, cleaning products and disinfectants, also to fuels, oils, weak and diluted acids .
ANTISTATIC PROPERTIES: between 0.1 and 1000 Mohms with 100V.
THERMAL CHARACTERISTICS:

Highly resistant to wide variations in temperature.
Retains all its properties in hot or cold environments: will not harden or   break.
Resistant to contact heat (250°C for over one hour).
NBR elastomer provides good thermal protection.

COMFORT: The upper remarkably light and supple, making walking and extended wear easier .
CONTACT THE ETCHE SECURITE DESIGN OFFICE FOR ALL SPECIFIC REQUESTS
 VARIATIONS
Mid boot: interior height 270 to 300 mm.
Removable lined sock.
       64130 Mauléon - France | tel. 33 (0)5 59 28 05 41| fax: 33 (0)5 59 28 30 10
          e-mail:etche@etchesecurite.fr | contact: M Jean-Louis Plantey | http://www.etchesecurite.com