CLARK - MIC CLARK
 REFERENCES AND
 MAIN CHARACTERISTICS

 
boots:

CLARK (unlined) EN347.

ATS sole: High adhesion on all types of surfaces (loose ground, greasy,   slippery, steeply sloping floors). Adhesion factor greater than 0.15 (in compliance with NFS 73012 standard).
 Economical.
 Washes easily. Dries very quickly.
Good mechanical resistance, tough and durable.

shoes:

MIC CLARK (unlined) EN347.

Moulded waterproof ankle boot (stitched tongue gusset with lacing   through  waterproof rings).
 Edged collar .
Same chemical and mechanical resistance as the Clark range from which   it was developed.
Same sole and lining.
Average height: 120 mm.
 
 SPECIFIC CHARACTERISTICS
COLOUR: Black.
HEIGHT: 350 mm.
SIZES: 35 to 48
WEIGHT (size 42): 1.800 kg per pair.
TYPE OF ELASTOMER: Moulded SBR rubber.
MECHANICAL CHARACTERISTICS: Good resistance to cuts, abrasion and perforation
Reinforced on exposed areas (instep, heel, ankles).
CHEMICAL CHARACTERISTICS: Good resistance to occasional contact with commonly used chemicals.
THERMAL CHARACTERISTICS: Highly resistant to frost and heat.
Will not crack, harden or break.
Sole resistant to contact heat (150°C for over one hour).
COMFORT: Comfortable.
CONTACT THE ETCHE SECURITE DESIGN OFFICE FOR ALL SPECIFIC REQUESTS
 VARIATIONS
Mid boot: interior height 270 to 300 mm.
       64130 Mauléon - France | tel. 33 (0)5 59 28 05 41| fax: 33 (0)5 59 28 30 10
          e-mail:etche@etchesecurite.fr | contact: M Jean-Louis Plantey | http://www.etchesecurite.com