FIREMAN
 REFERENCES AND
 MAIN CHARACTERISTICS

 

FIREMAN SA (steel toe-cap and midsole) EN345-2 HRO-CR (FPA)
BF: black.
BJ: yellow.

Fireproofed nitrile rubber boot, totally watertight in intensive use.
 ATS sole (adhesion on all surfaces).
Excellent resistance to heat, heat flow and flames.
Good resistance to contact with commonly used chemicals.
Antistatic sole.
 Insulating boot
   (for use with low tension current up to 500V).

 
 SPECIFIC CHARACTERISTICS
COLOUR: Black or yellow.
WEIGHT (size 42): 2.050 kg per pair
TYPE OF ELASTOMER: Fireproofed NBR.
MECHANICAL CHARACTERISTICS: Excellent resistance to perforation, cuts and abrasion
   (150 mm3, in compliance with EN344 standard).
Exposed areas reinforced (instep, heel, ankles).
CHEMICAL CHARACTERISTICS: Excellent resistance to contact with chemicals:
fuels, greases, oils, weak and diluted acids, solvents (1).
ANTISTATIC PROPERTIES: between 0.1 and 1000 Mohms with 100V.
DIELECTRICAL CHARACTERISTICS: Avoids risk of electrocution with low tension current (up to 500V)
THERMAL CHARACTERISTICS:

Soling resistant to contact heat: 250°C for more than 1 hour.
Upper resistant to heat flow: 2W/cm² for 3 minutes.
Flame resistant upper (extinction in 2 seconds max
after 15 seconds' exposure to flame).

(1) list of resistance to chemicals available on request.
CONTACT THE ETCHE SECURITE DESIGN OFFICE FOR ALL SPECIFIC REQUESTS
 VARIATIONS
Version RAC2 (steel toe-cap & midsole) EN345-2 HRO-CR (FPA)
  Mid boot with reflective band and leather straps.
- BF: black.
- BJ: yellow.
Mid boot: interior height 270 to 300 mm.
Thigh boots and waders.
Customized boots.
Widened opening for use with protective clothing.
       64130 Mauléon - France | tel. 33 (0)5 59 28 05 41| fax: 33 (0)5 59 28 30 10
          e-mail:etche@etchesecurite.fr | contact: M Jean-Louis Plantey | http://www.etchesecurite.com